Operating Precautions for Automatic Heat Shrink Film Packaging Machines

Introduction:

The market size of automatic heat shrink film packaging machines has been continuously expanding, thanks to improved product performance and quality. These machines offer low cost, convenience in transportation, compact size, and deliver exquisite packaging results, thus broadening the scope of their usage in various industries. However, operating a heat shrink film packaging machine requires attention to certain precautions. In this blog, we will discuss these essential operating guidelines to ensure safe and efficient use of the equipment.

Pre-operation Inspection:

Before starting the machine, thoroughly inspect its exterior for any potential safety hazards and eliminate them. Check the fasteners for tightness and lubricate all components. Verify if the hydraulic oil level indicated on the oil tank is sufficient and ensure there are no leaks in the pipelines.

Power Connection:

Before connecting the power supply, cut off the lead wires of the left and right motor for movement. Conduct a no-load test for the contractors to ensure proper engagement and disengagement. Once confirmed, reconnect the lead wires.

Familiarization and Training:

Prior to operating the machine, it is essential to become familiar with its structure, performance, and operating procedures. Receive proper ground-level training and pass the examination before assuming the responsibilities.

Coordinated Operation:

Maintain coordination between your hands and feet while operating the equipment. Exercise accurate judgment and avoid rushing or making mistakes due to haste.

Electrical Faults and Safety:

In case of electrical faults requiring the opening of the explosion-proof box cover, ensure to disconnect the power supply in advance. After opening the explosion-proof box cover, take precautions to avoid any injuries or scratches caused by contact with explosive surfaces.

Maintenance and Repair:

It is strictly prohibited to pass under the bucket after it has been lifted. If maintenance is required under the bucket, either interlock the safety cabinet or install protective brackets beneath it.

Obstacle Clearance:

During machine operation, refrain from crossing over hard obstacles larger than 300mm.

Working Distance and Safety:

Ensure that the machine is at least 30m away from the work area, with the bucket raised and secured with a safety pin, to prevent any damage to the equipment.

Machine Shutdown:

When the machine stops working, disconnect the power supply and lower the bucket to the ground. When leaving the machine, ensure that the safety device of the main switch is engaged to prevent accidents.

Additional Notes:

While the heat shrink film automatic packaging machine can be used for lifting mine cars, it should not be used for activities such as roof repairs, side dumping, or trenching with the bucket.

Conclusion:

The automatic heat shrink film packaging machine is an effective packaging method widely used in the market. By using shrink film to wrap products or packages, it enhances their visual appeal and value. The shrink film, when heated, tightly wraps the products or packages, providing them with airtight, moisture-proof, and dirt-resistant properties, safeguarding them against external impacts and splashes. These precautions discussed above are crucial for the safe and efficient operation of the heat shrink film automatic packaging machine. For further information, feel free to contact us at any time.